Washing Machine Heater 1900W (with sensor)
Available in stock
| Quantity | Price per unit | You save |
|---|---|---|
| 1–2 pcs | 52,99 lei | — |
| 3–4 pcs | 50,34 lei | 5% (−2,65 lei/unit) |
| 5–10 pcs | 47,69 lei | 10% (−5,30 lei/unit) |
| 11+ pcs | 45,04 lei | 15% (−7,95 lei/unit) |
Washing Machine Heater 1900W with Sensor
Professional spare part for repairing washing machines with electric heating. The 1900W heating element with integrated temperature sensor hole ensures rapid water heating and correct operation of washing cycles. Compatible with most washing machine models with a standard flange.
What you get with this product
- Quick repair without service — standard dimensions and connectors, mounts directly in place of the faulty heating element
- Efficient heating at 1900W — water reaches the set temperature quickly, saving time and energy with every wash
- Extensive compatibility — 82x28mm flange and spade connectors fit most washing machine brands
- Integrated sensor — pre-drilled hole for temperature sensor installation, ensuring correct program operation
- Durable construction — tubular stainless steel heating element resists limescale buildup and corrosion, ensuring long-term reliability
- Small investment compared to replacing the machine — extends the life of your existing appliance at minimal cost
How it works and how to install it
The heating element is installed in the washing machine's tank using the flange with screws, connecting to the electrical supply via spade terminals. The sensor hole allows for the installation of a thermostat that controls the water temperature. Before installation, unplug the machine and turn off the water tap. Replacement requires removing the back panel, disconnecting the old heating element, and installing the new one with the gasket properly secured. If you do not have experience in appliance repair, it is recommended to call a qualified technician to avoid leaks or electrical problems.
Frequently Asked Questions
How do I know if this heating element is compatible with my washing machine?
Check the flange dimensions on your old heating element — if the flange is 82mm wide and 28mm high, and the power is 1900W, this part is compatible. You can also take a picture of the existing heating element for comparison.
Why does the heating element need a sensor hole?
The hole allows for the installation of the temperature sensor, which communicates with the machine's electronic module, ensuring that the water heats up to the exact temperature required for each wash program and preventing overheating.
How difficult is it to change the heating element myself?
If you have basic electrical knowledge and experience with home repairs, changing it takes 30-45 minutes. It requires removing the back panel and careful attention to correctly sealing the flanges to prevent water leaks.
Technical Specifications
| Nominal Power | 1900W |
| Supply Voltage | 220V AC |
| Connector Type | Spade terminals |
| Total length with flange | 240mm |
| Heating element length from flange | 215mm |
| Immersion loop length | 200mm |
| Heating element width | 70mm |
| Flange width | 82mm |
| Flange height | 28mm |
| Sensor hole | Yes |
| Heating element material | Tubular stainless steel |
Warranty and Support
You benefit from a 24-month warranty in accordance with Romanian legislation for manufacturing defects and a 30-day return policy if the product does not meet expectations. Delivery is fast via national courier with secure packaging to protect the components.
Couldn't load pickup availability
