Electrical Distribution Block 207 - 125A / 500V 1.5-16mm / 2.5-25mm
Available in stock
| Quantity | Price per unit | You save |
|---|---|---|
| 1–2 pcs | 23,99 lei | — |
| 3–4 pcs | 22,79 lei | 5% (−1,20 lei/unit) |
| 5–10 pcs | 21,59 lei | 10% (−2,40 lei/unit) |
| 11+ pcs | 20,39 lei | 15% (−3,60 lei/unit) |
Modular Electrical Distributor for Industrial and Residential Panels
The 207 electrical distribution block allows for the safe distribution of current from a main source to 12 separate loads, without requiring complex wiring solutions. Ideal for electrical panels in large residential buildings, commercial spaces, or industrial environments where you need to power multiple circuits simultaneously. It supports loads up to 125A and accepts cables with cross-sections from 1.5 mm² to 25 mm².
What you get with this product
- Distributes current from 2 inputs to 12 separate outputs — eliminates the need for multiple junction boxes
- Quick connections with screw clamp system — each cable mounts securely in under 30 seconds
- Compatible with copper and aluminum cables between 1.5-16 mm² (inputs) and 2.5-25 mm² (outputs) — maximum design flexibility
- CE and EN 60947-1 certified — complies with European safety standards for electrical distribution equipment
- Transparent body with visible markings — quickly identify the configuration and check connections without opening the cover
- Standard DIN rail mounting — integrates directly into any conventional electrical panel
How it works and how to install it
The distributor functions as a circuit multiplier: current enters through the 2 main terminals (clearly marked on the body) and is distributed uniformly to the 12 output terminals. Mounting is done on the DIN rail in the electrical panel — simply clip the block onto the rail, insert the cables into the corresponding terminals, and tighten the fixing screws. No special tools are required, just a flathead or PH screwdriver. Make sure the power supply is cut off before installation and that the cable cross-section complies with the marked limits: 1.5-16 mm² for inputs, 2.5-25 mm² for outputs.
Frequently asked questions
Can it distribute current from a single source, or do I need to use both inputs?
You can use a single input if you are powering only one main circuit. The two inputs allow simultaneous connection of two separate sources or a single source with two large-section conductors.
Is it safe for three-phase installations?
Yes, the block can be used in single-phase, two-phase, or three-phase installations with neutral, provided that the total voltage does not exceed 500V and the maximum current is 125A per input.
How do I know if my cables fit the output terminals?
The output terminals accept cables with cross-sections between 2.5 mm² and 25 mm². If you use a cable thinner than 2.5 mm², the contact may be unreliable. Above 25 mm², you will not be able to physically insert the cable into the terminal.
Technical specifications
| Maximum rated current | 125A |
| Maximum operating voltage | 500V |
| Number of inputs | 2 |
| Number of outputs | 12 |
| Input cable cross-section | 1.5 - 16 mm² |
| Output cable cross-section | 2.5 - 25 mm² |
| Connection type | Screw terminals |
| Body material | Temperature and impact resistant plastic |
| Mounting | Standard DIN rail (35 mm) |
| Certifications | CE, EN 60947-1, RoHS |
| Compatible conductor material | Copper, aluminum |
Warranty and support
The product benefits from a 24-month warranty according to Romanian legislation, with a 30-day return right from delivery. Fast delivery by national courier with SMS and email confirmation.
Couldn't load pickup availability
